4 channel fiber optic video transceivers support broadcast quality transmission of four channels of 8-bit digitally encoded video and two channels of bi-directional data and forward audio over one multimode and singlemode optical fiber. The modules are compatible with NTSC, PAL and SECAM CCTV camera systems and support RS-485 data protocol. Plug and Play design ensures adjustment-free installation and operation. LED Indicators are provided for instantly monitoring system status.

4 channel fiber optic video transceivers Video
Channels: 4 simplex
Input/Output Signal: 1.0 Vpk – pk
Bandwidth: 6.5 MHz                  
Video Sampling Rate:15 MHz
Signal-to-Noise Ratio: >58 dB
Input/Output Impedance: 75 ohms
Differential Phase: 0.7°
Differential Gain: <1%

4 channel fiber optic video transceivers Audio
Input Impedance: 47K ohms unbalanced
Output Impedance: 10K ohms unbalanced
Signal-to-Noise Ratio: >75 dB  
Audio Sampling Rate: 58 kHz
Bandwidth: 20 Hz to 20 kHz

4 channel fiber optic video transceivers Data
Formats: RS-232 (3-wire), TTL, RS-422, RS-485 (2-wire/4-wire) Transparent transmission for Manchester, Biphase, SensorNet
Baud Rate: 0 kbps to 115.2 kbps
Bit Error Rate: <1.0E-9

4 channel fiber optic video transceivers Ethernet           
10/100BASE-TX, CAT5 RJ-45,   IEEE Std. 802.3, Full Speed 10M/100M Ethernet duplex
Optical
Fiber Cable: Single mode
Optical Connector: FC
Emitter: FB or DFB
Wavelength: 1310 nm or 1550 nm
Transmission Distance can reach 100 Km

4 channel fiber optic video transceivers Environmental
Operating Temperature: -25°C to 75 °C
Maximum Humidity: 95% relative, Non-condensing
Mechanical
Dimensions: 170X110X47mm
Construction: Aluminum
Power Supply
Protection: Solid-state short circuit protection
External Power Supply, Input:100~240 V AC 50/60Hz   Output: 9 V DC, 4 A

4 channel fiber optic video transceivers Electromagnetic compatibility
EMC Directive 2004/108/EC
EN60950-1:2006